Logicube EchoPlus-NG, Руководство пользователя

Страница: 71 / 77

REMOTE OPERATION
Logicube EchoPlus-
NG User’s Manual
63
8.2 Command Line Interface (CLI)
The EchoPlus-NG also has a CLI, or Command Line Interface. This interface has no graphical
content and is all command line (text) based and is for advanced users who have knowledge of
command line functions. This type of connection requires a Telnet or SSH client. There are
several Telnet and SSH clients available from different software companies. Microsoft Windows
also has a built-in Telnet client that can be used.

Windows Vista, 7, 8, 8.1, and 10 have a built-in Telnet client but is not
installed by default. Installing the Telnet client may require the assistance of a
Network or Systems Administrator. Other third-party Telnet programs are
available.

All versions of Windows do not have a built-in SSH client.

For assistance on the installation of any SSH or Telnet software (including
Microsoft’s Telnet client) please check with your IT administrator.
8.3 Connecting via SSH
Connecting to the EchoPlus-NG via SSH (Secure Shell) is similar to connecting via Telnet. Since
Windows does not have a built-in SSH client, a third party SSH client will need to be downloaded
and installed to connect via SSH. For instructions and support on how to use third party SSH
clients, please contact the SSH client’s manufacturer.
1. Connect the EchoPlus-NG to the network by attaching a network cable to the RJ45
connector in the back of the EchoPlus-NG.
2. Turn the EchoPlus-NG on and allow it to boot up completely.
3. Open the SSH client and select an SSH connection.
4. Connect to the EchoPlus-NG either by IP address or by name. The name of the EchoPlus-
NG will be
EchoPlus-NG- XXXXXX where XXXXXX is the serial number of the EchoPlus-
NG).
On some Operating Systems, the EchoPlus-NG will need to be accessed by
opening EchoPlus-NG-XXXXXX.local.
5. Login with the username “ it ” (without the quotes) and the password “ it ” (without the
quotes).
6. A prompt should appear in the SSH window.
7. The EchoPlus-NG can now be configured or managed via the command line interface.
8.4 Connecting via Telnet
By default, the Windows Telnet Client is not installed with Windows, but it can be installed it by
following the steps below: