Logicube EchoPlus-
NG User’s Manual
58
7: Updating/Loading/Re-loading the EchoPlus-NG Software
7.0 Updating/Loading/Re-loading New Software – Introduction
New and improved software will be released from time to time and will always be available on
the EchoPlus-NG support page. Browse to
http://www.logicube.com
. Point your mouse to Tech
Support and select Product Knowledge Base.
7.1 Updating/Loading/Re-loading New Software Instructions
There are two methods of how to update the EchoPlus-NG software:
A.
FROM NETWORK –
Via the Internet through a network connection
B.
FROM USB DRIVE
– Via software file download onto a USB drive flash.
The actual software installation will take about 5 minutes. If
FROM NETWORK
was
chosen, the total time can exceed 10 to 20 minutes (or longer) depending on
Internet speeds and Internet traffic.
7.1.1 From Network – Via the web
1.
Connect the EchoPlus-NG to a network with Internet access. Set the
proxy settings (IP settings) if necessary. Attach a network cable to the
back of the EchoPlus-NG.
The EchoPlus-NG is DHCP
enabled by default.
2.
From the main menu on the EchoPlus-NG, tap the down arrow twice
then tap the
Software Updates
icon. A screen will appear showing the
current version of software installed towards the top of the screen.
3.
Select
From Network
. The EchoPlus-NG will check for a newer version
on the web. If one is found, it will display the version on the screen and
the
Update
icon will be selectable.
4.
Tap the
Update
icon to begin the update. A confirmation screen will
appear. Tap
Yes
to continue the update.
5.
Do not interrupt the update process. It may take several minutes. Once
completed, a ‘Successful’ screen will appear.
6.
Reboot the EchoPlus-NG by turning the unit off then back on using the
Power switch in the back of the unit.
Содержание EchoPlus-NG
Страница 12: ......
Страница 14: ...GETTING STARTED Logicube EchoPlus NG User s Manual 6...
Страница 15: ...GETTING STARTED Logicube EchoPlus NG User s Manual 7...