Logicube EchoPlus-NG, Руководство пользователя

Страница: 20 / 77

QUICK START
Logicube EchoPlus-
NG User’s Manual
12
3.1.1 Step-by-step instructions – Clone
Details on each selectable option on the Image screen can be
found in
Chapter 4.0 Clone .
1. Select Clone from the types of operation on the left side then tap the
Mode icon and select one of the available modes then tap the OK icon.
2. Depending on your selection on step 2, tap Master to choose the
master drive. Tap the OK icon to continue.
3. Tap Settings and adjust any of the settings as needed (Job Info, Clone
Method Settings, HPA/DCO, Error Handling, and Hash/Verification. Tap
the
OK icon to continue.
4. Tap Target and select the Target. Tap the OK icon to continue. Tap Start
to start the cloning task.
5. A progress bar will appear at the bottom of the screen showing the
bytes processed, the rate (speed), elapsed time, and time remaining.
6. When finished, the status will show “COMPLETED”. At this point, it is
recommended to tap
Reset Task to reset the task so the drive bays
properly reset and not show as being used or assigned for other tasks.
3.1.2 Cloning to Smaller Capacity Drives
Target drives must be at least the same capacity or larger than the Master drive.
Specifically, each Target drive must have the same number of sectors (or Logical
Block Addresses/LBAs) or a larger number of sectors or LBAs than the Master.