Logicube EchoPlus-NG, Руководство пользователя

Страница: 23 / 77

QUICK START
Logicube EchoPlus-
NG User’s Manual
15
3.3 Wipe
Drives connected to the Target ports (right side) can be wiped. The following
methods are available in the Wipe menu:

Secure Erase –
Sends a command to the drive instructing it to wipe the drive based on
the hard drive manufacturer’s specifications for the Secure Erase command.
If errors appear when performing Secure Erase, contact the drive
manufacturer to check if the drive supports Secure Erase.

Wipe Patterns –
Allows the user to set a specific pattern to use for wiping the drive.
The number of passes is customizable (up to 7 passes) along with the type of data
written for each pass. In addition, a 7-pass DoD wipe can be set with pre-selected pass
values.

Format –
Instructs the EchoPlus-NG to format a drive. The EchoPlus-NG can format the
drive using the NT file system (NTFS) or EXT4 file system.
3.3.1 Step-by-step instructions – Wipe
1. Select Wipe from the types of operation on the left side.
2. Tap the Target icon and select the drive to wipe then tap the OK icon.
3. Tap the Settings icon and choose the type of wipe to be performed
(Secure Erase, Wipe Patterns, and/or Format). If Wipe Patterns is
selected, choose the type of Wipe Pattern to perform (DoD or Custom).
4. If the drive has an HPA or DCO area that needs to be wiped, tap the
HPA/DCO icon and select Yes to wipe the HPA/DCO area of the drive.
OPTIONAL for Wipe Pattern mode : Tap the Passes icon to edit the number
of passes and what value gets written on each pass.