Logicube EchoPlus-NG, Руководство пользователя

Страница: 33 / 77

CLONE
Logicube EchoPlus-
NG User’s Manual
25
Job Info is a common setting available in all modes. This screen allows users to
enter information about the job. This is optional and is not required to start an
imaging operation.
Information entered here will appear in the logs. In addition, some forensic
analysis software can import the information when the image files are opened.
Tap any of the boxes and an on-screen keyboard will appear allowing
information to be entered. After entering the information, tap the
OK icon to go
back to the previous screen.
Log names and file names can be customized by entering a
Job/File Name . For example, if a clone operation is
performed, and the Job/File Name is set to TestJob , the log
name and file name will be called TestJob .
Subsequent Job/File Names that are the same will be
identified with a dash, then the next image number. For
example, TestJob-1, TestJob-2, etc.
4.3.2 HPA, DCO
HPA and DCO is a setting that can be found in Drive to Drive and Drive to File.
Some computer manufacturers will use a utility that creates an HPA or DCO
configuration on a hard drive. These configurations are designed to change drive
characteristics such as drive capacity as seen by the computer’s BIOS.
The HPA/DCO setting allows the user to set whether a drive’s HPA or DCO is to
be unlocked and imaged. Select
YES to unlock and image a Host Protected Area
(HPA) or Device Configuration Overlay (DCO).