LOFTNESS Battle Ax 207460, Руководство пользователя и каталог запасных частей, Страница: 21 / 66

17 Battle Ax Skid Loader OM
Operation
WARNING: Always stop engine and remove
key before leaving operators seat.
Tilt attachment mounting frame back and raise the Battle
Ax slightly above the ground when moving the machine.
NOTE: Operate the Battle Ax as low to the ground as
possible without the teeth striking ground or
other obstructions.
WARNING: Lifting or tilting the Battle Ax
increases the risk of flying debris.
Lower mulching head so skids are on ground.
Set engine speed to low idle and engage the mulching
head.
Slowly increase engine speed to high idle.
Move the loader and Battle Ax forward and begin mowing.
NOTE: Various mowing conditions, and desired finished
cut appearance, will determine proper ground
speed.
Operating Tips
To reduce rotor jams, approach brush and trees at a
slow speed.
When operating the mulching head near the ground,
keep as low to the ground as possible without the teeth
striking ground or other obstructions.
NOTE: Because of the high speed of the rotor, the life
of the teeth will be reduced if it is operated in
rocky terrain or in areas where many obstacles
are present.
Operating Instructions
Getting Started
For best results, the areas to be mowed should be free
of debris such as bottles, metal objects, rocks and wire
etc. The teeth cut and pulverize the brush, grass and
weeds.
Operate the Battle Ax as low to the ground as possible
without the teeth striking ground or other obstructions.
Because of the high speed of the teeth, the life of the
teeth will be reduced if it is operated in rocky terrain or in
areas where many obstacles are present. The Battle Ax
deposits cut material over the entire width-of-cut, which
eliminates bunching or windrowing behind the machine.
WARNING: Due to the potential danger of
flying debris, it is the owner’s responsibility
and is “ABSOLUTELY MANDATORY that
IMPACT-RESISTANT SHIELDING” be
installed on the machine to protect the
operator.
WARNING:
Lifting or tilting the Battle Ax
increases the risk of flying debris.
DANGER: Keep hands and feet out! Do not
step on or climb over the unit while machine
is in operation, or engine is running. Do not
carry passengers.
WARNING: Do not operate the attachment
above the rated RPM. Check with your
Loftness dealer to be sure your attachment is
set-up with the correct hydraulic motor to
match the hydraulic flow GPM (Gallons Per
Minute) of your machine.
WARNING:
Flying debris can gather on the
loader and needs to be cleaned off, especially
around the radiator, oil cooler screens, engine
compartment, and exhaust areas. Periodic
cleaning will help prevent the possibility of
fire.
DANGER: DO NOT allow ANY people or
animals within 300 feet of the work area while
operating this machine.