LOFTNESS Battle Ax 207460 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 66

LOFTNESS Battle Ax 207460 Скачать руководство пользователя страница 17

13

Battle Ax Skid Loader OM

Installing the Battle Ax to the Loader

(Cont’d)

Hydraulic Connections

WARNING:

Hydraulic Lines. Protect hands

and body from high pressure fluids. Pressurized
fluids can penetrate the skin. Disconnect and
lock out power source before disconnecting
and/or connecting hydraulic hoses.

1

Install the Battle Ax quick couplers to the loader.

NOTE:

The case drain quick coupler (1) of the Battle
Ax must be connected to the loader’s auxiliary
hydraulic system for proper operation of the
Battle Ax.

IMPORTANT

:

It is the owner’s responsibility to assure
that the hydraulic hoses from the power
unit to the attachment are not caught in
pinch points, or in any way damaged by
moving parts.

Checking Rotor Rotation

DANGER:

Keep hands, feet, and clothing clear

of rotor and bearings while the loader is running.

1

Raise the Battle Ax off the ground and place blocks (1)
underneath the skids. Lower the Battle Ax down on the
blocks.

Rotor

Rotation

Front of Battle Ax

Loader

Engage the loader auxiliary hydraulics, the rotor should
start rotating in a forward direction. The rotation should be
counterclockwise as viewed from the left side of the Battle Ax.

NOTE:

If the rotor is rotating backward, reverse the
quick couplers (not supplied) on the Battle Ax
hydraulic hoses. Re-install the couplers (not
supplied) on the loader and test for correct rotor
rotation.

WARNING:

The Battle Ax can be damaged if

rotor is operated in reverse rotation.

NOTE:

Keep the Battle Ax on the blocks for checking the
rotor speed. See next procedure for instructions.

Set-up Instructions

«
...
15
16
17
18
19
...
»

Содержание Battle Ax 207460



































































Отзывы:

Нет отзывов