Start-up
Auto setup (TV sets with RJ-12/RS-232C
System interface)
➠
Ensure that the devices are set up correctly (page 11, page 12), all cables
are connected properly (page 13-page 14) and that the microphone is con-
nected and positioned correctly (page 18).
Set the remote control for TV operation. The Loewe TV set
switches on automatically.
Call up the
TV menu
.
Select
Connections
.
Change to the menu line below.
Select
Sound components
.
Confirm
OK
.
The selection
SOUND COMPONENTS - Sound playback via
...
appears.
OK
OK
Sound components
Sound playback via ...
TV speakers
Speaker system
HiFi/AV amplifier
Sound
proector
HiFi/AV amplifier or TV speakers (switchable)
Sound projector or TV speakers (switchable)
Proceed
Select
Sound projector
or
Sound projector or TV
speakers (switchable)
(page 28).
Confirm
OK
.
The
Sound Projector
switches on automatically.
OK
OK
Activate listening position
SOUND PROJECTOR
Configuration/modification of Sound projector
Set/change listening position
Proceed
OK
Call up menu
Set/change listening position
.
OK
SOUND PROJECTOR
Select memory position
Position 1 (MEM1)
Position 2 (MEM2)
Position 3 (MEM3)
Proceed
OK
Select one of the three memory positions
Position 1
-
3
(MEM1-3)
.
Confirm
OK
.
OK
SOUND PROJECTOR
Rotate TV
-30
Proceed
OK
If the Loewe TV set is equipped with swivel castor control, now
use
to turn the TV to the required listening position.
Confirm
OK
.
OK
SOUND PROJECTOR
Start auto setup
Proceed
OK
OK
Start auto set-up
.
SOUND COMPONENTS WIZARD
The auto setup is running. Please wait ...
During the measurement nobody should be present in the room.
After about 3 minutes a final chime is played. The procudure can be cancelled
by the
key.
19 -
