Start-up
Connecting to the Mains Supply
Make the required cable connections as described in section “Connecting“
(page 13 - page 15). First remove the left-hand cover at the back of the unit. Insert
the smaller three-pin plug of the network cable into the
AC IN
socket (page 7) at
the rear of the player, and then insert the mains plug into a 220-240V/50-60 Hz
power socket.
Switching on/off
Set the remote control for
Sound Projector
operation by
briefly pressing the button
SP
.
Your
Sound Projector
switches on. If you have connected a
Loewe TV set (from Chassis SL 1xx) via HDMI, then this will
switch on as well. Otherwise, switch your TV set on and set the
respective AV programme slot.
To switch off the device, press the On/Off switch on your
Sound
Projector
or
Assist
(page 3) remote control.
➠
Switch off your
Sound Projector
in case of a prolonged
absence, first using the
On/Off button
and then pull the
mains plug out. You can thus save energy and protect the
environment.
17 -
