Start-up
Using the remote control
for the first time
To insert or change the batteries, press where the arrow is embossed on the cas-
ing. While doing so, simply slide the battery compartment lid down and remove it.
Insert alkaline manganese batteries LR 03 (AAA) and ensure the correct position
of + and –. Slide the cover on again from the bottom.
Setting up the Assist Remote Control
Other Devices
You can operate various Loewe devices using the
Assist
Remote Control. The device
buttons
REC
-
SP
-
AUDIO
can be set up for this.
Press the required device buttons and the Stop button
simultaneously for 5 sec. until the corresponding LED display
flashes twice.
Then select the two-digit device code from the table:
Unit
Code
Factory setting
Loewe ViewVision 8106 H
10
Loewe ViewVision, Centros 21x2
12
Loewe ViewVision DR+ DVB-T
13
REC
Loewe Auro 2216 PS/8116 DT
14
Loewe BlutechVision
15
Loewe Soundprojector 1
17
Loewe TV Radio digital
19
AUDIO
Loewe Mediacenter
20
Loewe BlutechVision Interactive
21
HDMI CEC Mode
¾¾
22
Loewe AudioVision
24
Loewe Sound Projector SL
25
SP
Restore defaults
99
The corresponding LED Display flashes twice.
Sound functions
It is possible to set the devices with which the buttons with the sound functions
(
V+
/
-
,
Mute
and
sound mode
) should work.
Depending upon which device configuration you use (page 13- page 15), set the
device keys and sound functions of the
Assist
remote control. If you use the inte-
grated network configuration as described on page 13, the Loewe TV set will process
the sound and the sound functions of the
Assist
remote control do not have to be
changed. With a configuration as described on page 14 and page 15, it is necessary
to change the sound functions on the
Assist
remote control as described below.
Press the device button
TV
and, at the same time, the button
with the single digit function code from the list, for 5 sec. until
the LED Display flashes twice.
Function
Code
Figure
Loewe AudioVision
3
Loewe Mediacenter
4
Loewe TV
¾
5
Page 13 / Page 14
Loewe Sound Projector
6
Page 15
¾
Factory setting
¾¾
From Chassis SL 1xx onwards
Operating Loewe Equipment
Using the remote control for a Loewe TV set
Press
TV
button; the LED Display above it lights up for approx.
5 seconds
Using the remote control for a Loewe recorder
Press the
REC
button; the LED Display above it lights up for ap-
prox. 5 seconds
Using the remote control for Sound Projector
Press the
SP
button; the LED Display above it lights up for approx.
5 seconds
Using the remote control for Mediacenter
Press the
AUDIO
button; the LED Display above it lights up for
approx. 5 seconds
Every time a button is pressed, the LED display lights up for the selected operating
mode for checking purposes (
TV
–
REC
–
SP
–
AUDIO
).
Please refer to the respective operating conditions on how to operate the indi-
vidual devices.
- 16
