Loepfe Savio FRS 3000, Инструкция по установке

Страница: 27 / 30

27
3N1
SOFTWARE
Software
SCU Software Upgrade
Upgrade Procedure by Means of a USB Memory Stick
1. Take the “Open End VX.XX Build XXXXXX Upgrade.exe” file from the data carrier
2. In special case: Rename the file “Open End VX.XX Build XXXXXX Upgrade.oxo” to “Open End VX.XX Build XXXXXX Up-
grade.exe”.
3. Make sure there is no “OpenEnd” directory on top of the memory stick. In case there is one, copy this temporarily to
your hard disk or rename it, but remove it from the memory stick. Best Case: take an empty USB stick
4. Copy the file “Open End VX.XX Build XXXXXX Upgrade.exe” to the memory stick (on top).
5. Double-click the file “Open End VX.XX Build XXXXXX Upgrade.exe”, and unzip (or extract) it. This will create a “OpenEnd”
directory on top of the memory stick, containing all required files and folders for the upgrade.
6. Now, plug the memory stick into the SCU, and after 10 to 15 seconds the following screen will appear:
7. Click the “Next >” button, and a new screen appears: