Loepfe Savio FRS 3000, Инструкция по установке

Страница: 18 / 30

18
3N1
INSTALLATION
Installing and Connecting Detectors
Parts: detectors A9052641(basic) or A905264(full) with
cables A5008452 (2 m) and A5008453 (3 m), screws
M 114 x 16, DIN 912, washers M4 DIN125, label set
A579664.
1. Mount the SH on the Savio clamp with the screw and the
washer. (Figure 1)
2. Fix the SH with the screw on Savio clamp. (Figure 2)
3. Pass, as shown on Figure 4 and connect first 6 SH cable
2 m and last 6 cable 3 m per section. (Figure 5)
4. Mark the other side of SH cable with the proper detector
number. (Figure 6)
5. Plug the connector in the corresponding detector number
on SE-unit (Figure 6).
Figure 1
Figure 3 Figure 4
Figure 2
Figure 5
Figure 6