Loepfe Savio FRS 3000, Инструкция по установке

Страница: 26 / 30

26
3N1
SERVICE
Replacing a SE-Board
Part number: A505668310
1. Remove the two SE-unit cover screws.
2. Unplug the power connection and then all connections.
3. Hook the unit off the mounting frame.
4. Remove the five screws and take out the board.
5. Copy the address DIP switches settings.
6. Hook the unit on the mounting frame.
7. Reinsert all connections and finally the power cable.
8. Close the SE-unit.
Note:
The software is automatically sent to the SE-Board
by the SCU.
Replacing a Detector
Part number: A905264100 (basic), A905264000 (full)
1. Lock the spinning unit.
2. Disconnect the detector cable.
3. Loosen the two nuts and washers.
4. Mount and connect the new detector.
5. Unlock the spinning unit software
Spare Part Numbers
Loepfe Description
A016964900 Cleaning Tips
A280066600 SCU basic
A280066300 SCU full
A505668310 SE board basic
A701000000 extension print for SE (Full Version)
A905264100 Sensor basic
A905264000 Sensor full
V314103 Fuse for SCU
A080992900 Fuse for SE
P222004 Battery for SCU
A016957900 Battery for SE
045757000 USB Stick Loepfe