Operator's Manual No. 1/2015 "Alulift type Mobile Elevating Work Platform"
August 2015 Page 36
Beware of overhead obstacles or other hazards around the mobile platform when it is in
motion.
Do not lift the mobile platform when the machine is on a truck, forklift truck or any other
device or vehicle. except for special systems from Lockhard Sp. z o.o. which are intended
for this purpose.
Be aware of the danger of crushing. All parts of the body must be kept within the limits of
the mobile platform guardrails when it is in motion.
Do not lower the platform if there are staff, third parties or any other obstacles in the
area below it.
Make sure that there are no staff, third parties or obstacles on the route of the machine.
Take into account any blind spots.
Dangerous driving and fun are strictly prohibited.
Do not modify or alter stops or any other safety devices.
Do not attempt to relieve the wedged platform using controls until the staff exits the
platform.
Before starting work with to operate the PRP, it is necessary to carry out a detailed
inspection of the site in order to identify potential hazards in the work area.
Works on the PRP type Alulift platform are only permitted when using all parts of the
side panel, handrails, knee protection and toe-boards.
It is prohibited to use the PRP platform in the condition indicating the consumption of
alcohol.
It is prohibited to use the control pendant and the emergency lowering device at the
same time.
8.1.
Lighting
The PRP is not equipped with its own lighting so the user should provide appropriate
lighting devices on the site.
9.
MAINTENANCE INSTRUCTIONS
9.1.
Maintenance Operator
Alulift
Maintenance Operator
is the operator who operates a given device and therefore
such a person must be properly qualified in accordance with current legal provisions in the
country of use. In Poland the operator of Alulift should have proper qualifications to operate
this type of device (hoisting and hauling equipment) awarded by the Office of Technical
Inspection.
9.2.
Maintenance and Inspection Schedule
Points which are subject to periodic maintenance or inspection and time periods in which
they should be carried out are given in table 6.
The actual environment of the PRP operation may affect the maintenance schedule.
