Operator's Manual No. 1/2015 "Alulift type Mobile Elevating Work Platform"
August 2015 Page 21
Photo 13
Photo 14
Photo 15
Photo 16
Using the key unlock the emergency stop button on the control pendant. Before pressing the
control pendant buttons, make sure that it is held securely.
Press and hold the white button on the control pendant until the platform is lifted 2 - 10 cm
upwards
PRP Alulift will work properly as long as the gears and the gear racks
simultaneously engage on both sides of the load-bearing structure!
Install two (shorter) horizontal braces connecting PRP base frames
Photo 17
Install diagonal braces connecting PRP base frames on the opposite side of the access gate.
Install one end of the brace on the lowest level of the first segment of the base frame. Install the
other end of the brace on the highest level of the opposite side of the first segment.
