Operator's Manual No. 1/2015 "Alulift type Mobile Elevating Work Platform"
August 2015 Page 22
Photo 18
The brace hooks should be fitted in the designated places!
Photo 19 Correct position of fitting braces.
Level the equipment using aligning bolts in the wheels and lock the wheels using a brake at each
of the four wheels and check the levelness of the platform using a bubble level. If necessary, the
platform should be levelled by means of adjusting nuts.
Photo 20 the brake left in the locked position Photo 21 the brake left in the unlocked position
Stage III - Further structure levels assembly
From the ground fit further matching frames of the PRP load-bearing structure. (please pay
attention to the colour marking scheme of the components - red and green)
