LOBENN LB200186, Руководство по установке

Страница: 61 / 86

For All Installations
Power
IP Link
IP Monitoring
Local Port
Internet Port
 /

Blinking
 On

Off

Off
 /

Active
 Unit is powered. “Heartbeat” of 3 seconds on, 1
second off indicates normal operation.
 Unit is properly configured to connect to the
central station.
 Relays are in the fall back to the regular phone
line state.
This can happen when the central station is not
accepting LNI connections. This state is temporary;
the central station will either accept the connection,
or the LNI will switch to the Secondary LNS. If this
state persists, contact the central station for
instructions.
Power
IP Link
IP Monitoring
Local Port
Internet Port
 /

Blinking
 On
 On

Off
 /

Active
 Normal operation. “Heartbeat” of 3 seconds on,
1 second off indicates normal operation. .
 Unit has acquired an IP address from the router.
 Unit has established an IP connection to the
alarm-central station. Relays are set to IP
monitoring.
Power
IP Link
IP Monitoring
Local Port
Internet Port
 /

Flashing
 /

Flashing
 /

Flashing

Off
 /

Active
 Unit is downloading a new version of firmware.
This process may take several minutes. Please wait
until the flashing stops before disconnecting cables
or powering down.
Power
IP Link
IP Monitoring
Local Port
Internet Port
 /

Blinking
 /

Flashing

Off
 /

Active

Off
 Unit is powered and connected to a PC for
configuration. Programming the LNI on the Local
Port can be performed in any state except power off
and boot phase. However, it is recommended that
programming be done initially without an Internet
port connection (for example, without a connection
to the local router).
LoBenn Network Interface 2000 Installation Manual
61