LOBENN LB200186, Руководство по установке, Страница: 53 / 86

Note : Use These Instructions for Standard Installations
If this installation of the LNI 2000 is part of the installation of an entire alarm
system, a connection from the alarm panel telephone terminals to the LNI 2000
is still necessary.
1. Fashion an alarm cable from a standard multi-pair cable with an RJ45 con-
nector on one end. This cable is generally provided with the alarm panel.
2. Connect the alarm cable to the alarm panel at the telephone terminals as per
panel instructions.
3. Connect the free end of this cable to the LNI 2000, using one of the follow-
ing two methods:
A.
If you have used the provided alarm cable plug it into the “Panel”
port on the LNI 2000.
B.
If you have stripped both ends of multi-pair cable, or used 2 pair
quad for this connection, thread this end through the knockout and
connect it to the
corresponding terminals in the “Alarm Panel”
section of terminal strip on the LNI 2000. Connect “R1” to “R1”,
“T1” to “T1”, “R” to “R”, “T” to “T”, and the “Tamper” terminals
to “Tamper” terminals. The maximum gauge for the wire is 16
AWG and the minimum is 22 AWG.
Note: Before starting Option B, remove the terminal strip cover and
knockout. To remove the terminal strip cover and knockout without
damaging the tamper switch, see
Removing and Replacing the
Terminal Strip Cover on page 57 and Removing the Knockout on
page 58 .
1. Use the integral tie-down bracket to secure all wires before replacing the
terminal strip cover. Trim the tie wrap before replacing the terminal strip
cover.
Installing the Tamper Resistor and Verifying the Tamper Alarm
In order to protect the alarm system from malicious tampering, LoBenn Inc.
recommends the installation of a tamper circuit.
Generally the installation of a tamper circuit involves inserting a 2.2 K resistor
in the RJ31X and programming the alarm panel for tamper.
Details of programming and the resistor type used vary among the various types
of alarm panel. Please refer to the manufacturer’s installation manual for the
alarm panel for more information.
LNI 2000 Installation Manual
53