LOAD KING 80-160, Руководство оператора

Страница: 184 / 369

184
80-160
Operating Instructions
9. Swing and spot the load over the location where it is to be deposited.
10. Lower the load and unfasten the hook.
When spotting the load it may be necessary to alter the boom length or boom angle.
In making these adjustments, the operator must guard against exceeding the rated
load as determined by the load rating charts.
When operating a hydraulic crane, the operator should realize that hydraulic and structural competence,
NOT TIPPING LOAD, is often the determinant of lifting capacity.
Therefore, THE OPERATOR MUST BE GUIDED SOLELY BY THE APPROPRIATE MANUFACTURER’S
LOAD RATING CHART when considering load weight. The manufacturer’s rated loads must never be
exceeded.
Cranes which are factory equipped with auxiliary winches may require additional counterweight if the
auxiliary winch is removed. Refer to the capacity chart (load rating plate) for the required counterweight
total.
When lowering light loads, be sure to maintain sufficient cable tension to prevent the
cable from becoming loose on the cable drum. Loose cable can slip and then bind
suddenly, causing jerky lowering and shock loading of the boom. Loose wraps may
form loops which can be overlain when the cable is wound onto the winch drum.
These conditions can result in personal injury or property damage.