LOAD KING 80-160, Руководство оператора

Страница: 177 / 369

177
Initiating Operation
1. If possible, position the unit at the job site in such a manner as to assure all work operations can be
performed without repositioning the truck (see Work Site Position on page 156 ). However, strict
observance of load weight, radius and maximum load rating must always be complied with.
2. Set parking brake securely.
3. Place transmission in neutral and engage PTO.
4. Outrigger can be controlled and set from the upper operator’s cab or from the side of the truck. (see
Upper Controls & Instruments or Outrigger Positioning topics).
5. Extend all outriggers to make firm contact with ground. See OUTRIGGER POSITIONING topic.
Provide outrigger pads if terrain is soft or if outriggers tend to sink into ground. Properly level the
machine using the console mounted bubble level. While operating the crane, frequently check that
proper level condition is maintained.
NOTE:
Console mounted bubble levels must be periodically checked for proper adjustment. See
Maintenance manual for more information.
6. Position yourself at the operator’s console and accelerate the truck engine to desired speed.
7. Bring the hydraulic oil up to operating temperature. (See Cold Weather Operation on page 157. )
8. Check all controls for proper operation. During all operations, the controls should be metered to
prevent sudden starting and stopping.
FAILURE TO METER YOUR CONTROLS INDUCES HIGH SHOCK LOADS ON
THE EQUIPMENT WHICH MAY RESULT IN STRUCTURAL FAILURE OR
OVERTURNING OF THE CRANE.
DEATH OR SERIOUS INJURY MAY RESULT.