LNC-T800
CNC Group Instruction
LNC Technology Co., Ltd.
55
1.5.5
WORK
：
Workpiece Coordinate System
Click function button
【
WORK
】
to enter workpiece coordinate system setting screen. There are totally 7 sets
of workpiece coordinate system to be set which respectively represent expansion offset, and G54 to G59.
When preparation is done, operators can use cursor to mark sets, and input strings of Xxx…Zxx…, xx
represents the axis-direction to be input with values, and click <INPUT>, and then coordinate value will be
renewed immediately for part programs to call different coordinate systems.
The 1
st
page is expansion offset (0), G54, G55, G56, etc. workpiece coordinate system, and the next pageis
for G57, G58, G59, etc.
G54 machine coordinate values of home point =G54 setting value +expansion offset (0) setting value.
G55 machine coordinate values of home point =G55 setting value +expansion offset (0) setting value.
G56 machine coordinate values of home point =G56 setting value +expansion offset (0) setting value.
G57 machine coordinate values of home point =G57 setting value +expansion offset (0) setting value.
G58 machine coordinate values of home point =G58 setting value +expansion offset (0) setting value.
G59 machine coordinate values of home point =G59 setting value +expansion offset (0) setting value.
Figure 1.5-8 Workpiece coordinate system setting screen-1
Expansion offset setting directly effects other coordinate systems. G54 to G59 are workpiece coordinate
systems, when being set, consider workpiece coordinate, tool and program content. If want to reset a
coordinate system, move cursor to the number of the coordinate system to be set, and input axis name and
new coordinate value, and then click <INPUT> to set the value to the cursor-specified coordinate system. 3
axes can be written in a row, but remember to input decimal points to avoid misleading. (E.g.: X100. Z200. ).
Содержание LNC-T800
Страница 2: ......
