LiteOn DD-A100 Series, Руководство пользователя

Страница: 2 / 56

Important Safety Instructions
1. READ INSTRUCTIONS - Read the instructions care-
fully before using this product.
2. RETAIN INSTRUCTIONS - Retain the instructions for
future reference.
3. HEED WARNINGS - Observe warnings listed in the
manual.
4. FOLLOW INSTRUCTIONS - Follow the instructions
when using this product.
5. CLEAN - Use a dry cloth for cleaning.
6. VENTILATION - Do not block any ventilation openings
of this product
7. MOISTURE - Do not use this product near water, and
be sure to prevent this product from being exposed to any
dripping or splashing.
8. HEAT - Do not install this product near any heat source s,
such as radiators, heat registers, stoves or other devices
(including amplifier) which produce heat.
9. POLARIZATION -
Do not defeat the safety purpose of
the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The
wide blade or the prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. POWER CORD - Protect the power cord from being
walked on or pinched, particularly at plugs, convenience
receptacles and the point where they exit from the
product.
11. ACCESSORIES/ATTACHMENTS - Use only acces-
sories/attachments specified by the manufacturer.
12. USAGE - Unplug this product during lightning storms or
when it is not used for long periods of time.
13. CART - Use only cart, stand, tripod bracket or table
specified by the manufacturer or sold with the product.
When a cart is used, operate carefully to prevent the
objects from tip-over.
14. SERVICING -
Contact qualified personnel when servic-
ing is needed. Servicing is required when this product has
been damaged in any way, for example, when the power
cord or plug is damaged; liquid has been spilled on the
product; objects have fallen into the product; the product
has been exposed to rain or moisture; the product does not
work normally; or the product has been dropped.
15. BATTERY - To prevent battery leakage which may result
in bodily injury, property damage or damage to the unit,
please follow the instructions listed below when using the
product’s remote control.
• Install
all
batteries correctly, with
+
and
-
signs
matching the marks indicated.
• Do not mix batteries (
old
and
new
or
carbon
and
alkaline, etc.)
• Remove batteries when the remote is not used for a
long time.
16. WASTE -
This product may contain lead and mercury.
Disposal of these material may be regulated due to
environment considerations. For disposal or recycling
information, please contact your local authorities or
the Electronic Industries Alliances: www.eias.org
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operations.