LiteOn DD-A100 Series, Руководство пользователя

Страница: 21 / 56

21
Getting Started
Started_Advanced_02_02
The channel will be moved to the desired location.
4. When completed, press

to select ‘Exit’ or
another option to continue, then press ENTER .
 After you insert channel(s), numbers of other channels
will change accordingly.
..........................................................................................
Swapping TV Channels
1. Press

to select a channel from the list, then press
ENTER
.
2.
Press

to select ‘Swap’, then press
ENTER
.
Starteww wwwwwwwd_Advanced_02_06
9
3. Press

or the number buttons to enter the
channel number, then press ENTER .
Started_Advanced_02_07
The channel will be swapped to the designated location.
4.
To swap other TV channels, repeat steps 1-3 to
complete the settings.
..........................................................................................
Renaming TV Channels
1. Press

to select a channel from the list, then press
ENTER .
2. Press

to select ‘Rename’, then press ENTER .
3. The ‘on-screen input keypad’ will be displayed. Follow
the instruction in ‘Using On-Screen Input Keypad’ to
enter characters.
You can enter up to 10 characters for a name.
On-Screen Input Keypad (p.27)
4. When completed, press

to select ‘Finish’,
then press ENTER .
..........................................................................................
Enabling/Disabling TV
Channels
You can temporarily remove unwanted channel(s) from
the list created from automatic scanning process or add the
previously disabled channel(s) back to the list.
1.
Press

to select a TV channel which you would
like to switch on/off, then press ENTER .
2. Press

to select ‘Enable’ or ‘Disable’, then press
ENTER .
Started_Advanced_02_09
The channel selected will then be switched on or off.
3. To switch on or off other channels, repeat steps 1-2 to
complete the settings.
..........................................................................................
Fine-Tuning TV Channels
After you have performed the channel scanning, you may
like to fine-tune the TV channel signal manually. Follow
the steps listed below to complete the function.
1.
Press

to select a channel from the list, then press
ENTER .
2. Press

to select ‘Fine Tune’, then press ENTER .
3. Press

or the number buttons (0-9), then press
ENTER to fine-tune the channel signal.
Started_Advanced_02_10
4. When completed, press

to select ‘Exit’ or
another option to continue, then press ENTER .