Lissmac COMPACTCUT 905 P/T, Руководство по эксплуатации

Страница: 17 / 80

17/80
2.5.2. Electrical energy
Only use original fuses with prescribed rating. The floor saw must be switched off immediately with
malfunctions! Electrical work may only be carried out by examined and qualified technical personnel.
The electrical equipment of a machine is must be inspected/checked regularly. Defects, such as loose
connections or damaged cables, must be eliminated immediately. The machine must be labeled so
that the machine is not operated by other persons.
2.5.3. Dust
When working in confined spaces, observe existing national regulations if necessary.
In order to minimize dust formation during cutting, necessary suction power must be ensured.
2.5.4. Noise
see chapter 3.4
2.5.5. Exhaust gases
Machines with internal combustion engines may not be operated indoors or in confined spaces.
2.6. Transport
When moving with a crane, attachment means with sufficient load capacity must be used. Check the
attachment means for damages beforehand.
Determine a competent instructor for the lifting process.
Lift floor saws only in accordance with the specifications of the operating manual professionally with
a hoist.
Only use a suitable transport vehicle with sufficient load capacity.
Secure the load reliably on the basis of the regulations. Use suitable attachment points
The motor of the joint cover must be switched off even with a slight location change. The saw blade
may not rotate any longer with direct restart.