Lippert 3000 Series страница 2 Скачать руководство пользователя

Страница: 2 / 36

Rev: 08.18.21

Page 2

CCD-0004099

TABLE OF CONTENTS

Introduction

Safety

Operation

Stowed Position to Ramp Door Position

Ramp Position to Stowed Position

Ramp Position to Extended Patio Position

Stowed Position to Extended Patio Position

Extended Patio Position to Ramp Position

Extended Patio Position to Stowed Position

Maintenance

Notes

Introduction

The Lippert 3000 Series Patio Rail Kit has been designed for easy installation and use. The Lippert 3000 Series

Patio Rail Kit is pre-installed onto the ramp door, it can be used in a 90 degree angle as a patio, or fold the

front of the patio rail kit to the sides and lower the ramp door to the ground to load toy vehicles into the

trailer. The overall capacity is 3000 lbs. for doors with five or more bumper contact or lower hinge leaves,

1600 lbs. for doors with less than five bumper contact or lower hinge leaves.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/doors-support-patio-rail-kits

Additional information about this product can be obtained from lci1.com/support or the myLCI app is

available for free on Apple App Store® for iPhone® and iPad® and also on Google Play™ for Android™ users.

App Store® and iPad® are registered trademarks of Apple Inc.

Google Play™ and Android™ are trademarks of Google Inc.

NOTE:

Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Содержание 3000 Series





































Результаты поиска

Содержание 3000 Series

Отзывы:

Похожие инструкции для 3000 Series

Бренды по названию

Популярные бренды

Lippert 3000 Series, Руководство пользователя

Результаты поиска

Содержание 3000 Series

Отзывы:

Похожие инструкции для 3000 Series

Бренды по названию

Популярные бренды