Rev: 08.18.21
Page 4
CCD-0004099
Fig. 2
5.
Unhook the bungee (Fig. 2A) from the front driver's side and curbside brackets (Fig. 2B), holding the
patio railings to the ramp door.
A
B
NOTE:
Ensure door cables are attached before starting the following steps.
1.
To open the ramp door, first verify the compression latch is unlocked (Fig. 1A).
2.
Raise the handle of the compression latch (Fig. 1B) so that it is parallel with the ground.
3.
Twist the compression latch handle 90° in either direction (Fig. 1C). This will release the locking tab
(Fig. 1D) from the door jamb, allowing the ramp door to be lowered.
4.
Slowly lower the ramp door until it rests at the 90 degree position, parallel to the ground (Fig. 2).
Fig. 1
A
A
B
D
C
