Rev: 08.18.21
Page 27
CCD-0004099
11. Located towards the top of the ramp door, release the curbside front panel bottom leg (Fig. 71A) from
the keeper (Fig. 71B) by pushing the compression latch lever (Fig. 71C) towards the trailer, slide the leg
out of the keeper and release the lever.
NOTE:
Alternate versions of the Lippert 3000 series will have a spring plunger (Fig. 72A). Turn the lever
(Fig. 72B) towards the trailer, and release the curbside patio rail leg.
Fig. 70
A
A
B
C
12. For the curbside patio railing, swing the front panel (Fig. 73A) out in-line with the side patio railing (Fig. 74A).
13. If applicable, disengage the J-bolt (Fig. 66) on the curbside of the patio railing.
A
B
C
Fig. 71
A
B
Fig. 72
Fig. 73
Fig. 74
A
A
