110
Section 4: Maintenance of the Access Point
LAPAC1750PRO Access Point Software User Manual
110
Section 4: Maintenance of the
Access Point
This section describes how to maintain the access point and see system detailed
information
•
Maintenance
•
Diagnostics
Maintenance
From the access point Administrator UI, you can perform the following
maintenance tasks:
Firmware
•
Switching Firmware Image
•
Firmware Upgrade
Configuration Backup/Restore
•
Backup Configuration
•
Restoring Configuration
Reset/Reboot
•
To Restore the Factory Default Configuration
•
To Reboot the Access Point
Firmware
Use this page to select the firmware image that the AP loads when it boots and
to upload a new firmware image to the device
Figure 63: Firmware Maintenance
Table 74: Firmware Information and Management
Field
Description
Active Image
Identifies the firmware images on the system:
•
Active Image Firmware Version—The version number
of the image that is loaded during system boot
•
Inactive Image Firmware Version—The version
number of the inactive (backup) image on the system
Upload Method
The method to use to upload a new firmware image to the
AP:
•
HTTP—Use a Web browser
•
TFTP—Use a TFTP server
New Firmware
Image (HTTP
Upload)
Click Browse to find and select the new firmware image
located on an administrative system
Image Filename
(TFTP Upload)
The path and filename of the firmware image to upload
to the AP
Server IP (TFTP
Upload)
The IP address of the TFTP server where the new firmware
image is located
Содержание LAPAC1750PRO
Страница 1: ...LAPAC1750PRO User Guide ...