77
Section 3: Configuring the Access Point
LAPAC1750PRO Access Point Software User Manual
Destination Port
Select this field to include a destination port in the
match condition for the rule The destination port is
identified in the datagram header
Once you select the field, choose the port name or
enter the port number
Select From List
Select the keyword associated with the destination
port to match:
•
ftp
•
ftpdata
•
http
•
smtp
•
snmp
•
telnet
•
tftp
•
www
Each of these keywords translates into its equivalent
port number
Match to Port
Enter the IANA port number to match to the destination
port identified in the datagram header The port range
is 0–65535 and includes three different types of ports:
•
0–1023: Well Known Ports
•
1024–49151: Registered Ports
•
49152–65535: Dynamic and/or Private Ports
EtherType
Select the EtherType field to compare the match criteria
against the value in the header of an Ethernet frame
Select an EtherType keyword or enter an EtherType
value to specify the match criteria
Select from List Select
Select one of the following protocol types:
•
appletalk
•
arp
•
ipv4
•
ipv6
•
ipx
•
netbios
•
pppoe
Match to Value
Enter a custom protocol identifier to which packets are
matched The value is a four-digit hexadecimal number
in the range of 0600–FFFF
Class of Service
Select the field and enter a class of service 802 1p user
priority value to be matched for the packets The valid
range is 0–7
Source MAC
Address
Select this field and enter the source MAC address to
compare against an Ethernet frame
Source MAC Mask Enter the source MAC address mask specifying which
bits in the destination MAC to compare against an
Ethernet frame
An f indicates that the address bit is significant, and a
0 indicates that the address bit is to be ignored A MAC
mask of ff:ff:ff:ff:ff:ff matches a single MAC address
Destination MAC
Address
Select this field and enter the destination MAC address
to compare against an Ethernet frame
Содержание LAPAC1750PRO
Страница 1: ...LAPAC1750PRO User Guide ...