![background image](http://html.mh-extra.com/html/linksys/lapac1750pro/lapac1750pro_user-manual_1925218076.webp)
74
Section 3: Configuring the Access Point
LAPAC1750PRO Access Point Software User Manual
Defining DiffServ
To use DiffServ for Client QoS, use the Configuration > Qos and Access Control
> Class Map and Configuration > Qos and Access Control > Policy Map pages
to define the following categories and their criteria:
•
Class: create classes and define class criteria
•
Policy: create policies, associate classes with policies, and define policy
statements
Once you define the class and associate it with a policy, apply the policy to a
specified VAP on the Global Settings page
Packets are classified and processed based on defined criteria The classification
criteria are defined by class The processing is defined by a policy’s attributes
Policy attributes may be defined on a per-class instance basis, and it is these
attributes that are applied when a match occurs A policy can contain multiple
classes When the policy is active, the actions taken depend on which class
matches the packet
Packet processing begins by testing the class match criteria for a packet A
policy is applied to a packet when a class match within that policy is found
DiffServ is supported for IPv4 and IPv6 packets
Use the Class Map page to add a new Diffserv class name, or to rename or
delete an existing class, and define the criteria to associate with the DiffServ
class
To configure a DiffServ Class Map, click the
Configuration > Qos and Access
Control > Class Map
tab
NOTE:
The Class Map page displays the Match Criteria Configuration fields only
if a class map has been created To create a class map, enter a name in the
Class Map Name field and click Add Class Map
Figure 39: QoS DiffServ Class Map
Содержание LAPAC1750PRO
Страница 1: ...LAPAC1750PRO User Guide ...