29
Section 3: Configuring the Access Point
LAPAC1750PRO Access Point Software User Manual
LAN
This section describes how to manage the access point and contains the
following subsections:
•
VLAN and IPv4 Address
•
IPv6 Address
•
IPv6 Tunnel
The configuration pages for the features in this section are located under the
Manage heading on the Administration Web UI
VLAN and IPv4 Address
The default wired interface settings, which include DHCP and VLAN information,
might not work for all networks
By default, the DHCP client on the access point automatically broadcasts
requests for network information If you want to use a static IP address, you
must disable the DHCP client and manually configure the IP address and other
network information
The management VLAN is VLAN 1 by default This VLAN is also the default
untagged VLAN If you already have a management VLAN configured on
your network with a different VLAN ID, you must change the VLAN ID of the
management VLAN on the AP
To configure the LAN settings, click the
Configuration > LAN > VLAN and IPv4
Address
tab
Figure 22: VLAN and IPv4 Address
The following table describes the fields to view or configure on the VLAN and
IPv4 Address page
Table 25: VLAN and IPv4 Address
Field
Description
MAC Address
Shows the MAC address for the LAN interface for the
Ethernet port on this AP This is a read-only field that you
cannot change
Management
VLAN ID
The management VLAN is the VLAN associated with the IP
address you use to access the AP The default management
VLAN ID is “1 ”
Provide a number between 1 and 4094 for the management
VLAN ID
Содержание LAPAC1750PRO
Страница 1: ...LAPAC1750PRO User Guide ...