Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 35 / 38

PTC-892 version 1 C 35
PTC-892 MODEM FCC DOCUMENT
Changes in Attestation Procedure for Plugs and Jacks:
Link Electronics, Inc., attests that the network interface plugs or jacks used on
this equipment comply with and will continue to comply with the mechanical
requirements specified in Part 68, Sub-part F, specifically the dimensions, tolerances,
and metallic plating requirements. The compliance of these connectors will be assured
by purchase specifications and incoming inspection. Documentation of such
specifications and/or inspections will be provided the FCC within 30 days of their
request for same.
Type of Service:
The PTC-892 is designed to be used on standard device telephone lines. It
connects to the telephone line by means of a standard jack called the USOC RJ-11C.
Connection to telephone company provided coin service is prohibited. Connection to
party lines service is subject to state tariffs.
Telephone Company Procedures:
The goal of the telephone company is to provide you with the best service it can.
In order to do this, it may occasionally be necessary for them to make changes in their
equipment, operations, or procedures. If these changes might affect your service or the
operation of your equipment, the telephone company will give you notice, in writing, to
allow you to make any changes necessary to maintain un-interrupted service.
In certain circumstances, it maybe necessary for the telephone company to
request information from you concerning the equipment which you have connected to
your telephone line. Upon request of the telephone company, provide the FCC
registration number and the ringer equivalence number (REN); both of these items are
listed on the equipment label. The sum of all the RENs on your telephone lines should
be less than five in order to assure proper service from the telephone company. In
some cases, a sum of five may not be usable on a given line.
If Problems Arise:
If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to the telephone
network. If the telephone company notes a problem, they may temporarily discontinue
service. When practical, they will notify you in advance of this disconnection. If
advance notice is not feasible, you will be notified as soon as possible. When you are
notified, you will be given the opportunity to correct the problem and informed of your
right to file a complaint with the FCC. Contact your telephone company if you have any
questions about your phone line.
In the event repairs are ever needed on the PTC-892, they should be performed
by LINK Electronics, Inc., or an authorized representative of LINK Electronics, Inc.