Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 29 / 38

PTC-892 version 1 C 29
PTC-892 Power-on Set-up Menu (continued)
Note: Pressing “B” from the submenus allows the user to go back to Main Menu without
making a selection.
Note: The Station call Letters can only be A-Z and/or 0-9, no spaces or punctuation. To
make the call Letters field blank, press only the enter key without entering any other
data.
Note: TSID must be converted to a decimal value before entering it into the power up
default menu.
To confirm the TSID and call letters have been added, hook up a monitor to the
"DECODER OUTPUT" BNC.
On the front of the PTC-892, hit the "TEST" button. The last line of the message will
show what you have added, for TSID and call letters. You can also select XDS from the
front panel decoder menu to show XDS in the "DECODE" corner of the main LCD
display. The call letters will be shown in the upper-right corner of the monitor that is
hooked up to the "DECODER OUTPUT".
If you are using V-chip software, the call letters and TSID packets inserted through the
communications program will not be overwritten. Hook up the PTC-892 back to the
source of captioning as it was originally, either to the phone line input if you have an
internal modem, or to the com port if your captioning is coming from your computer.
LISTING THE SOFTWARE INSTRUCTION SET
The PTC-892 can list its software instruction set by using a communications
program and giving it a ^AZ command (hold down Ctrl, hit A, let them go, hit Z), this
makes the software instruction set appear on the pc screen.