Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 24 / 38

PTC-892 version 1 C 24
PTC-892 Submenus and Displays (continued)
Load and Save Setting Menu
Figure 31
Turn the menu knob right from the Cntrl ‘A’ Codes In Menu and the Load &
Save Setting Menu is displayed. Pressing the menu knob, allows you to select the
following options:
Load & Save Setting
> Back (no selection)
Pressing the menu knob from here, returns you to the Main Display .
Load Default As
> Current Settings
Pressing enter from here loads the non-volatile power-on default settings
as the current settings, then performs a hard reset and returns to the Main
Display .
Load User as
> Current Settings
Pressing enter from here loads the non-volatile user profile settings as the
current settings, then performs a hard reset and returns to the Main Display .
Save Current As
> Default Settings
Pressing enter from here saves the current settings into the non-volatile
power-on default settings and returns to the Main Display . So next time unit is
re-powered it will start up with these settings.
Save Current As
> User Settings
Pressing enter from here saves the current settings into the non-volatile
user profile settings and returns to Main Display . So that the current settings
can be loaded at another time even after unit has been re-powered.