Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 25 / 38

PTC-892 version 1 C 25
PTC-892 Submenus and Displays (continued)
Load and Save Setting Menu (continued)
Set Factory Default
> As Current Settings
Pressing enter from here loads the factory default settings as the current
settings, then performs a hard reset, and returns to Main Display .
Set Factory default
> As Default settings
Pressing enter from here loads the factory default settings as current
settings, saves factory default settings as power-on default settings, the performs
a hard reset, and returns to
Main Display . Now it will power-up with the factory
default settings.
The factory default settings are as follows:
Field 1 Encode Mode
= Transparent
Field 2 Encode Mode = Transparent
Decode Mode = CC1
Data Recovery = OFF
Recovery Stream = Incoming Captions
Weather Lift = OFF (0 lines)
Negative Pedestal = OFF
Port 1 Selection = RS-232
Port 1 Baud Rate = 1200
Port 2 Baud Rate = 2400
Data Output Port(s) = Both Ports
Port Redirection = OFF
Input Format = Composite
Output Format = Composite
TSID = Disabled
Call letters = Disabled
Recovery Control Codes = Enabled
Recovery Tokenize
= Disabled
Odd Parity Encoding = Enabled
Duplicate CC Encoding = Enabled
Control “A” codes In = Process
Any of the above settings can be changed and saved into the non-volatile power-
on default settings or the non-volatile user profile settings.
Warning : When you load factory default settings you will loose the TSID and call
letters that you may have set.