Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 27 / 38

PTC-892 version 1 C 27
PTC-892 Power-on Set-up Menu
The power up default modes for the decoder, encoder, data recovery, TSID, and
call letters can be programmed from a PC, using a communications program. The ^AY
command (hold down Ctrl, hit A, let them go, hit Y) will bring up the following Main Menu:
Link Electronics PTC 892 Default Power-on Set-up Menu.
Enter the number of the item you wish to change.
1. Power up decode mode.
2. Power up encode mode.
3. Power up recovery mode.
4. Power up TSID mode.
5. Power up call letters mode.
6. Save and exit.
7. Exit.
Selecting one of the options will bring up the following submenus:
Current power up decode mode is CC1. (Factory default)
Enter decode mode.
0.
Off.
1. CC1.
2. CC2.
3. T1.
4. T2.
5. CC3.
6. CC4.
7. T3.
8. T4.
9. XDS.
B. Back.
Current power up encode mode is F1 Transparent, F2 Transparent. (Factory def.)
Enter encode mode.
0. Field 1 Transparent, Field 2 Transparent.
1. Field 1 Insert, Field 2 Opaque.
2. Field 1 Opaque, Field 2 Insert.
3. Field 1 Insert, Field 2 Transparent.
4. Field 1 Monitor, Field 2 Insert.
5. Field 1 Transparent, Field 2 Insert.
6. Field 1 Insert, Field 2 Monitor.
7. Field 1 Monitor, Field 2 Monitor.
8. Field 1 Opaque, Field 2 Opaque.
9. Newswire Mode 3 line with 20 s. timeout.
B. Back.