Link electronics Caption Encoder/Decoder SD SDI/Analog PTC-892, Инструкция по эксплуатации

Страница: 28 / 38

PTC-892 version 1 C 28
PTC-892 Power-on Set-up Menu (continued)
Current power up recover mode is off. (Factory default)
Enter recovery mode.
0.
Off.
1. CC1.
2. CC2.
3. T1.
4. T2.
5. CC3.
6. CC4.
7. T3.
8. T4.
9. XDS.
J. F1.
K. F2.
B. Back.
Current power up TSID is disabled. (Factory default)
Enter TSID mode.
0. Disabled.
1. Enter TSID.
B. Back.
Enter decimal TSID (0 to disable TSID) >
<Enter your assigned TSID and press the enter key.>
Current power-up call letters are disabled. (Factory default)
Enter call letters mode.
0. Disabled.
1. Enter call letters.
B. Back.
Enter Station Call Letters (up to 6 characters) >
<Enter the Station Call Letters and press the enter key.>
Options 6 and 7 from the Main Menu, on the previous page, allows the user to
save and exit or just exit, respectively. If menu number 6 is selected the PTC-892 will
save the information and do a hard reset. If menu number 7 is selected the PTC-892
will not save the information, but it will do a hard reset.