Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 151 / 338

80
CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3-
after Cleaned and lubricated the ball
bearing. Replace it if abnormal by special
tools.
●
To inspect all oil sealing for wear,
cracks. Replace it if abnormal by special
tool
●
To remove and inspect the gearshift
sensor (24) for break over performance
by multimeter. Replace it if abnormal
●
To remove and clean the drain bolt(18) and Oil
strainer(14)
●
To install bearing, oil seal by special tools.
Bearing with lubricating oil, Oil seal lips with
lubricating grease
●
Install new
“
O
”
ring
“
O
”
ring
with lubricating grease
●
Install gearshift sensor (24)and speed
sensor(12).
●
Install spacer (17) and drain bolt (18),
tighten it as standard torque.
Torque (Drain Bolt): 30N
·
m
Tool: Bearing remover and installer
Multimeter
Note: To inspect running performance
after bearing has been installed