Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 223 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 113
Reverse the procedure for installation noting the following:
Adjust accelerator cable play
Check to ensure that all removed parts are back in place.
Reinstall any necessary part which have not been reinstalled
3.5.3.8 Precautions
Do not submerge TPS in any cleaning fluid.
Always open the throttle valve using the throttle cable or lever.
Do not hold the valve at opening position by inserting tools or any sticks into the
bore.
The valve may be warped and the bore may be scratched. This type of damage may
keep the throttle from opening easily or fully closing.
3.5.3.9 Handling - DOs & DONTs
ACTION REASON
DO: Use care during assembly of harness to
throttle body.
Avoid terminal damage.
DO: Avoid any liquid contamination in the
throttle body area.
Ensure proper operation.
DO: Unload and install units one at a time from
packing trays.
Damage may be done to critical components.
DO: Return any dropped, damaged, or suspect
material with a tag that describes the problem.
(Only warranty cases)
Ensure fast and correct diagnosis of root cause.
DO: Remove and discard protective caps just
before assembling mating components.
Protects system from contamination, which can
prevent proper operation.
DO: clean the by pass passage after removing
bottom cover
To ensure good idle stability
DO NOT: Use any dropped or impacted unit. Internal damage may have occurred or
emissions settings may have been upset.
DO NOT: Store units without protective caps in
place.
Contamination may impair correct operation.
DO NOT: Ship or store near saltwater without
protection.
Corrosion buildup may impact proper
operation.
DO NOT: Exposed to environmental conditions
(Moisture) prior to complete vehicle installation.
Corrosion buildup may impact proper
operation.