Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 149 / 338

78
CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3-
NOTE: Place the proper crankcase sup-
port sleeve under crankcase halves
before removing plain bearing
1
、
Plain bearing bore diameter
Plain Bearing Replacement
Plain Bearing Removal
Caution: Always support crankcase
halves properly when ball bearings or
plain bearings are removed .Damages
to crankcase halves may occur if this
procedure is not performed correctly.
NOTE: Always use a press for removal of
plain bearing. Remove plain bearing with
the proper plain bearing remove/installer.
●
Carefully push the plain bearings out
from the crankcase half inside towards the
outside.
Plain Bearing Installation
Crankcase Plain Bearing
A Red
B Blue
NOTE: During disassembly ,do not dam-
age the sealing surface of the crankcase
halves.
NOTE: Crankcase and plain bearing must
be installed as a pair as shown in the
following table:
2.Plain bearing remover/installer