Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 178 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3-
107
●
Apply a light coat of moly oil to the piston pin.
●
Install piston pin into holes of piston and
connecting rod small end
●
place a clean rag beneath piston and in-
stall piston pin circlip
①；
●
Install the dowel pins and the new cylin-
der gasket.
Cylinder
●
Apply engine oil to piston skirt and cylin-
der wall.
●
Hold each piston ring with proper
position, insert piston into the cylinder.
WARNING: Use a new cylinder gasket to
prevent oil leakage
NOTE: When installing the piston, the
“
▲
” mark on piston top is located to the
intake side
NOTE: Piston and cylinder should be
installed according to grouping pairing,
Piston
Ⅰ
with cylinder 1 and Piston
Ⅱ
with
cylinder 2.
NOTE: While rotating crankshaft, pull the
cam chain upward, or the chain will be
caught between sprocket and crankcase
NOTE: Pull timing chain from chain cavity,
and then install cylinder properly.