Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 196 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 97
Inspection of Thermo switch
●
Remove thermo switch
●
Check the thermo switch for closing or
opening by testing it at the bench as
illustrated. Connect the thermo switch ¢Ù
to the circuit tester, place it in a vessel with
engine oil. Place the vessel above a stove.
●
Heat the oil to raise the temperature
slowly and take the reading thermostat
②
,
when the thermo switch closes and opens.
Tool: ammeter Thermo
switch Operating Temperature:
Standard: (OFF-ON): Approx. 88
℃
(ON-OFF): Approx. 82
℃
●
Installation: Use a new O-ring
③
and
tighten the thermo switch to the specified
torque;
Thermo switch Tightening Torque: 17N
·
m
●
Check coolant level after installation of
thermo switch. Fill coolant if necessary
3.4.6 Inspection of Water Tem-
perature Sensor
●
Place a rag under water temperature
sensor 1 and remove it from cylinder head
●
Check the resistance of water tempera-
WARNING:
Avoid sharp impact on thermo switch.
Avoid contact of thermo switch with
th t l