Linhai M565Li T3 EFI, Руководство по обслуживанию

Страница: 222 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 112
Throttle Position Sensor:
Reference voltage: 5
±0.1VDC
Resistance between T1 and T2:
3k~12k
Ω
Idle Air Control Valve:
Operating voltage: 7.5~14.2 VDC
Solenoid resistance: 53Ω±
10%
Solenoid inductance: 33mH
±20%
3.5.3.4 Operating Conditions
Normal Operating Temperature: -30~120°C
3.5.3.5 Throttle Body Removal
Disconnect negative ter
minal of the battery
Disconnect electric lead wire of throttle position sensor coupler, stepper motor
coupler
and MAP/MAT sensor coupler ( if this sensor is mounted on the throttle body)
Disconnect accelerator cable from throttle body
Remove air clea
ner outlet hose and throttle body outlet hose
3.5.3.6 Cleaning Procedure
If there is cover on the bottom, it may be removed and cleaned using carburetor cleaner
(3M make recommended). Once the throttle body cover is removed, spray the throttle-
body cleaner inside the shipping air passage, and use the brushes to gently dislodge the
dirt, gum and varnish that are present. Do not let the bye pass holes be blocked by dirt or
foreign particles.
3.5.3.7 Throttle Body Installation