manualshive.com logo in svg

Linear Acoustic AERO.qc, Руководство пользователя

Поделиться
Скачать
Linear Acoustic AERO.qc Скачать руководство пользователя страница 4

Warranty Information

DISCLAIMER OF WARRANTIES: 

Products manufactured by Linear Acoustic are warranted 

against defects in material and workmanship for a period of two (2) years from the date of purchase. 

THERE ARE NO OTHER IMPLIED OR EXPRESS WARRANTIES AND NO WAR-
RANTY FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During the warranty period Linear Acoustic Inc. will repair, or at our discretion replace, components 
which prove to be defective, provided the unit is returned, shipped pre-paid to us directly with a return 
authorization (RA) number clearly marked on the packaging. 

Please note, this RA number must be 

present or package will be refused and returned to sender.

All requests for repairs MUST include the unit serial number to ensure quick and accurate service.

DEFECTS CAUSED BY UNAUTHORIZED MODIFICATIONS, MISUSE OR ACCI-
DENTS, UNAUTHORIZED CUSTOMER REPAIRS, OR ANY FURTHER DAMAGE 
CAUSED BY INADEQUATE PACKAGING FOR SERVICE RETURN ARE NOT COV-
ERED BY THIS WARRANTY.

PLEASE SAVE THE SHIPPING CARTON AND ALL PACKING MATERIALS. FAILURE 
TO RETURN UNIT IN ORIGINAL SHIPPING CARTON AND PACKING MATERIALS 
WILL RESULT IN A CHARGE FOR NEW SHIPPING MATERIALS.

LIMITATION OF PERIOD OF ACTION ON CONTRACT:

 No action, regardless of form, 

arising out of the transactions under this agreement may be brought by buyer, its successors, agents 
and/or assigns, more than three years from date of purchase.

LIMITATION OF LIABILITY:

 It is understood and agreed that Linear Acoustic’s liability whether 

in contract, in tort, under any warranty, in negligence or otherwise shall not exceed the cost of repair 
or replacement of the defective components and under no circumstances shall Linear Acoustic be liable 
for incidental, special, direct, indirect or consequential damages, or loss of use, revenue or profit even 
if Linear Acoustic or its agents have been advised, orally or in writing, of the possibility of such damages.

This product contains Audyne dynamic range and loudness control processing and is manufactured 
under license.

This product optionally contains Dolby Digital (AC-3/Dolby E decoding and is manufactured under 
license from Dolby Laboratories, Inc. The decoder contains confidential unpublished works and is 
protected by US and foreign patents and is copyright 2007 Dolby Laboratories, Inc.

Linear Acoustic, the “LA” symbol, AERO.qc, AEROMAX, AutoNorm, MetaMAX, AutoMAX-II, 
AutoVoiceover, AutoVOX, CrowdControl, upMAX, and UPMAX-II are trademarks of Linear Acous-
tic Inc., all other trademarks remain the property of their respective owners.

Содержание AERO.qc































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды