manualshive.com logo in svg

Linear Acoustic AERO.qc, Руководство пользователя

Поделиться
Скачать
Linear Acoustic AERO.qc Скачать руководство пользователя страница 23

Linear Acoustic AERO.qc User Guide

19

Chapter 4: Detailed Operation

This chapter discusses in detail the structure of the Linear Acoustic AERO.qc, how to use 
the front panel LCD interface to access the menus, accessing and saving factory and user 
processing presets, GPI and Metadata setup, and information about test tone generation 
features of the unit. Definitions of the processing presets and individual adjustments are 
covered in detail in Chapter 7. 

4.1

Menu Navigation

Most of it is rather obvious, and a bit of experimentation will quickly make you comfort-
able navigating through the submenus. If in doubt, use the Left Arrow to back out towards 
the Main menu. The menus and submenus are structured to access more complex func-
tionality as you go deeper into the hierarchy. See page 31 for a menu tree.

The left side of Figure 4-1 shows the main screen in 

Locked

 mode. Once unlocked, the top 

level of the main screen looks like the right side of Figure 4-1. The meters show input, pro-
cessing, and output activity for the Main Inputs. The submenus to the right of the meters 
are used to access the processor’s functions, which are described in this chapter.

Figure 4-1 

Locked Main Screen (left); Unlocked Main Screen (right)

4.1.1

Mode Switches

Mode switches adjust parameters for features such as upmixing, bass enhancement, and 
the CrowdControl option.

•

LfRf Upmix (On/Auto/Off) - 

When the unit is not under GPI control (System Op-

tions -> GPI Setup), this is a control allowing manual invoking of standard upmixing 
and auto-upmixing. When the unit is under GPI control, this is an indication of the 
current mode of the upmixer: On, Auto, or Off.

Содержание AERO.qc































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды