manualshive.com logo in svg

Linear Acoustic AERO.qc, Руководство пользователя

Поделиться
Скачать
Linear Acoustic AERO.qc Скачать руководство пользователя страница 32

Linear Acoustic AERO.qc User Guide

Detailed Operation

28

•

Monitor Preset - Recalls one of the six available Monitor Presets under the 

Monitor Settings menu. For example, setting Monitor Preset 1 to Main 5.1 and 
Monitor Preset 2 to Main LoRo allows instant remote switching between 5.1 
and LoRo downmixed monitoring of the Main path. See below for more in-
formation on Monitoring setup.

•

Loudness Meter: Run/Stop - Allows starting/stopping (pausing) meter

•

Apply Loudness Measurement - Apply the automatically calculated difference 

between the loudness measured by the “D” LKFS meter and the target value 
as an offset to Input Gain. 

•

Reset Loudness Measurement - Clears the integrator for all meters, does not 

reset Input Gain. Note that except for a setting of Infinite, all integrators are 
self-clearing (so about 30 seconds for an integration time of 30 seconds).

•

Next Screen - Advances the Main Screen through the available displays

4.1.6

Record Audio to USB

Allows for capture of audio to an installed USB thumb drive. Note that this is currently 
intended for factory diagnosis of audio issues and requires a special player for proper re-
production. With instructions from the factory, 6 or 8 channels of input and/or output au-
dio can be captured and emailed to us to assist with troubleshooting.

4.1.7

Time and Date Settings

Allows configuration of the AERO.qc internal clock for correct time zone, date, and time. 
It also allows enabling a Network Time Piece (NTP) service which can automatically con-
nect to a time server and keep time and date synchronized. Depending on the network to 
which the AERO.qc is connected, configuration of the facilities Ethernet router may be 
necessary

NOTE: The 

AERO.qc

 has DHCP enabled which means that it will automatically fetch 

an IP address from the network. To assign a static IP address, the units MAC 
address is provided and the local router can be configured to map the desired 
IP address to that unique MAC address.

Содержание AERO.qc































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды