Linear Acoustic AERO.qc User Guide
Detailed Operation
24
Figure 4-3
System Info menu
•
Firmware Version
•
Host
– Unit name (normally AQC260XXX where XXX are from the unit S/N)
•
IP Addr
– 127.0.0.1 (dynamically allocated, so this will change IF connected), MAC
address is directly below the IP address.
•
CPU Usage
– Normally around 40% but will move depending on processing
•
Buffer Size –
The size of the audio buffer in samples.
•
Primary SR –
Average Sample Rate, nominally 48 kHz
•
LfRf Upmix
– Indicates whether upmixing is currently on or off
•
Metadata
– Indicates current status of incoming metadata
•
Options -
Displays installed options such as CN561 (Dolby encoder), SDI, etc...
4.1.3
System Options
The
System Options
menu provides the following functions:
•
Master Bypass
– Relay bypass of Digital Inputs to Digital Outputs
•
Metadata Bypass
– Relay bypass of metadata input to metadata output
•
I/O Options
– General system audio and clock setup:
•
Extra Delay (Ch 1-2, 3-4, 5-6, 7-8, 9-10) -
Allows up to 100 milliseconds of
additional delay to be added to each OUTPUT pair for plant timing purposes.
Default of 9 msec is equal to 33 msec of total input to output latency.
Содержание AERO.qc
