manualshive.com logo in svg

Linear Acoustic AERO.qc, Руководство пользователя

Поделиться
Скачать
Linear Acoustic AERO.qc Скачать руководство пользователя страница 13

Linear Acoustic AERO.qc User Guide

9

Chapter 2: Connections and Quick Setup

This chapter covers all required connections for the AERO.qc. 

2.1

Unpacking and Inspection

Before unpacking the unit, inspect the outer carton for shipping damage. If the carton 
shows damage, inspect the unit in those areas. Please save the carefully designed shipping 
carton and packing materials. In the unlikely event that the unit needs to be returned to the 
factory, alternate cartons or packing materials may not be adequate and can cause damage 
not covered by warranty.

The following essential items are provided with the unit: 

•

Bag containing: 

•

One or two IEC power cords (style matches country of order);

•

this manual, and a small piece of SWAG

•

Warranty information: Please fill out and return the warranty card to Linear Acoustic 
to ensure your software and documentation are kept up to date.

2.2

Installation

AERO.qc installation requires:

•

two standard rack space units with ADEQUATE VENTILATION (the unit vents 
from the front side slots;

•

standard 75-Ohm BNC cables for digital signal connections;

To connect to digital equipment with 110-Ohm XLR connectors, use impedance-
matching transformers (available from Canare, Neutrik and other manufacturers). 

•

Proper selection of reference. The unit will default to internal 48kHz, but for proper 
timing should be set to AES Ref In, AES 1, or SDI.

Содержание AERO.qc































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды