manualshive.com logo in svg

Linear Acoustic AERO.qc, Руководство пользователя

Поделиться
Скачать
Linear Acoustic AERO.qc Скачать руководство пользователя страница 24

Linear Acoustic AERO.qc User Guide

Detailed Operation

20

Upmixing

Upmixing is the process whereby two channel audio can be re-mapped into 5.1 channels 
using level and phase detection techniques. The proprietary, industry standard and road-
proven UPMAX

TM

 algorithm is incorporated in the AERO.qc. This allows for realistic 5.1 

channel audio to be created from normal stereo inputs, and performs even better when 
presented with matrix surround encoded two channel audio (i.e. LtRt). Two channel mono 
can also be accommodated in an audibly pleasing manner.

Critically, the UPMAX algorithm is fully downmix compatible. Many viewers are present-
ed with Dolby Digital (AC-3) encoded audio that is downmixed in their set top box or re-
ceiver and they happily listen in stereo, none the wiser that more information is actually 
present. Upmixing systems that use phase shifting techniques can produce unacceptable 
results in these systems obscuring dialog and amplifying background artifacts.

•

Upmix  LfRf  - 

Enter to set parameters for the Left Front/Right Front upmixer:

•

Enable Center - 

A checkmark indicates that the Center channel output of the 

upmixer is being reproduced from the Center channel Main output. Un-
checked indicates that Center channel audio from the upmixer is re-combined 
back into the other channels (no audio is lost). Default is 

Enabled

.

•

Enable Surround - 

A checkmark indicates that the Surround outputs of the 

upmixer are being reproduced from the surround Main outputs. Unchecked 
indicates that Surround outputs of the upmixer are re-combined back into the 
other channels (no audio is lost). Default is 

Enabled

.

•

Enable LFE - 

A checkmark indicates that an LFE channel is being created to 

produce the 0.1 channel of the upmixer. Default is 

Enabled

.

•

Center Width - 

Controls how much of center channel output of the upmixer 

is spread back into the Left and Right channel Main Outputs of the unit.!00% 
width equals all Center channel information summed back into the Left and 
Right outputs, while 0% equals all Center channel information sent to the Cen-
ter Channel output; Default is 

33%.

•

Center Level - 

Allows minor adjustment of upmixed Center channel level.

•

Center Exclusivity - 

Active in UPMAX-II Only. Adjusts the degree to which 

center channel information is excluded from the remaining channels, especially 
the surround channels. Use with care at extreme ranges.

•

Use Center Width for 5.1 (On/Off) - 

Allows discrete center channel audio 

to also be spread across the front channels by the percentage set by Center 
Width. Useful for better integrating material mixed with only dialogue in the 
center channel. Cleverly conceived by our friends David and Darren at As-

Содержание AERO.qc































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды