Linden L48MTV17a, Инструкция по эксплуатации

Страница: 11 / 36

9
8
Items in the Box
Television
TV Stands (Left & Right)
Screws
Remote control
Two AAA Batteries
Instruction Manual Quick-start guide
VOL CH
REC
9
To install the base please carefully follow the following assembly instruction.
The base comes with the purchased of your TV set. Install with care.
Basic Set Up
Step 1
Identify the 2 rectangular shaped holes in the bottom panel of the TV, located approx 27.5cm
from each side of the TV. These holes accept the rectangular section of the metal desk stands,
which are held in place by 26mm long screws.
Step 2
On each desk stand, identify the longer leg of the stand, and slide the rectangular section of the
desk stands into the TV so that the longer leg is facing towards the front of the TV.
Insert the 26mm long screws into the holes in the rear of the TV that line up with the holes in the
rectangular section of the metal desk stands, and tighten the screws firmly. You may need to
slightly jiggle the metal base stands around in their holes to allow the screws to be correctly
seated prior to being tightened.
Basic Set Up
30
L48MTV17a_IB_170814_Annie.indd 9 14/8/17 下午5:23